Comtech-ef-data CDD-562AL Manual do Utilizador descarregar pdf (Página 176)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0

HTTP (Web Server) Interface MN-CDD562AL564AL

10–10

• Read Community String public

• Write Community String private

• Trap Communty String comtech

SNMP System Contact, SNMP System Name, SNMP System Location

Enter the SNMP System contact data.

Authentication Trap

Click Enabled or Disabled.

Trap IP 1, Trap IP 2

Enter these SNMP addresses.

Trap Version

Use the drop-down list to select SNMPv1 or SNMPv2.

When finished, click Submit SNMP to save and activate these changes.

10.4.3 Admin | Working Mode

Use this page to set the Working Mode for the active demodulator.

Figure 10-5. Admin | Working Mode page

Working Mode

Select an available Working Mode, and then click Submit.

• Router – Small Network Mode: Small Network Mode supports up to 255 remotes, as allowed

using HDLC addressing. Select this mode to set the demodulator to be on independent IP subnets;

this mode requires adding static routes to pass traffic between them.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 239 240

Sem comentários

Comtech-ef-data CDD-562AL Manual do Utilizador Página 176