Comtech EF Data LPOD Especificações descarregar pdf (Página 85)

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter MN-LPOD

Ethernet-based Remote Product Management Revision 10

4–21

Calibrate LNB Current

The LNB should be calibrated only when it is running at nominal operating conditions.

The value of the LNB Current Supply (in mA) is provided here as a reference point. The LNB current

alarm upper and lower thresholds are determined by this calibrated LNB reference point and the

LNB current window setting.

Click [Calibrate] to perform an LNB calibration and display the updated read-only value.

4.5.4.3.3 Config | Utility

Use this page to configure LPOD operating parameters.

Figure 4-8. Config | Utility Page

Click [Refresh] (at the top of the page) to update the page appearance to the current operating

configuration.

Date and Time

• Enter a date using international format in the form DD/MM/YY (where DD = day [01 to 31],

MM = month [01 to 12], and YY = year [00 to 99]).

• Enter a time using HH:MM:SS format (where HH = hour [00 to 23], MM = minutes [00 to 59],

and SS = seconds [00 to 59]).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 217 218

Sem comentários

Comtech EF Data LPOD Especificações Página 85