Comtech EF Data LPOD Especificações descarregar pdf (Página 57)

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD

Updating Firmware Revision 10

3–3

o Your serial connection may use either an user-fabricated adapter cable to connect

the User PC serial port to the LPOD, or the optional CLC-10 Handheld Terminal (part

of M&C Accessory Kit (CEFD Kit KT-0020518). The following example depicts use of

the CLC-10 for 1:1 Redundant or Standalone serial connection:

B. On the User PC – If not using the CLC-10, configure the terminal emulator program if

applicable.

Refer to your terminal emulator program HELP feature or user guide for

operating and configuration instructions.

Configure the utility program serial port communication and terminal display operation:

• 38400 bps (Baud Rate) • 8 Data Bits • 1 Stop Bit

• Parity = NO

• Port Flow Control =

NONE

• Display New line Rx/Tx: CR

• Local Echo = ON

C. On the LPOD – Power up the unit. Your power connection varies depending on your

ordered unit.

See Sect. 2.2.3 Connector ‘J3 | POWER IN’ (AC Power Mains) or Sect. 2.2.4

Connector ‘J3 | POWER IN’ (DC Power Mains) in this manual for your specific

power connectors.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 217 218

Sem comentários

Comtech EF Data LPOD Especificações Página 57