Comtech EF Data LPOD Especificações descarregar pdf (Página 122)

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD

Serial-based Remote Product Management Revision 10

5–22

Parameter Type

Command

(Instruction

Code and

Qualifier)

Arguments

for Command

or Response

to Query

Description of Arguments

(Note that all arguments are printable ASCII characters)

Response to

Command

(Target to

Controller)

Query

(Instruction

Code and

Qualifier)

Response to Query

(Target to

Controller)

Local/Remote

State

LRS=

1 byte

Command or Query.

Sets or returns Local or Remote state for Indoor SSPA (always in remote mode for Outdoor SSPA) in the form x,

where x=0, 1, 2, or 3::

0 = Local

1=Serial

2=Ethernet

3=Serial+Ethernet (default value)

Note: The user will always have query access in any mode. The LRS command is also available in all modes as

a means of acquiring control. The intent of this command is to limit changes from being made on multiple

interfaces at the same time. Units without a front panel will treat an entry of 0 as reserved, and will refuse the

command by returning a mode error. The web page GUI will refuse connections unless LRS is set to enable

Ethernet remote control.

Example: <1/LRS=3’cr’

>0001/LRS=’cr’’lf’

LRS=

LRS?

LRS=x

(See Description of

Arguments)

Unit MAC Address

N/A

17 bytes

Query only.

Returns the MAC address of the unit, in hexadecimal format xx-xx-xx-xx-xx-xx

Example: <1/MAC?’cr’

>0001/MAC=00-06-B0-00-D2-A7’cr’’lf’

MAC=

N/A

MAC=xx-xx-xx-xx-

xx-xx

(See Description of

Arguments)

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 217 218

Comentários a estes Manuais

Sem comentários

Comtech EF Data LPOD Especificações Página 122

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio Comtech EF Data LPOD