Comtech EF Data Vipersat CDM-570 Guia do Utilizador descarregar pdf (Página 79)

Chapter 3 - Using the Command Line Interface (CLI) 3-43

Vipersat Configuration

In a fixed environment, enabling this feature will allow an operator to use the

VMS to maintain the route tables for the Hub TDM.

Figure 3-54

VMS Routes in Route Table

Enter F at the command prompt to toggle this setting.

SOTM Mode

This menu item appears for Remote modems only.

When a Remote modem is utilized in a SOTM application, it is under the

control of the ROSS. Should the ROSS fail, control of the modem can be

regained by disabling the SOTM mode by entering F at the command prompt.

Note that this command is an override only; it is not an enable/disable toggle.

Unit Role

The Unit Role configuration determines whether the target CDM-570/570L is

to function as a Remote or as a Hub in the Vipersat satellite network. From the

Vipersat Configuration screen (figure 3-6), enter R to display the dialog

shown in figure 3-55.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 161 162

Sem comentários

Comtech EF Data Vipersat CDM-570 Guia do Utilizador Página 79