Comtech EF Data CDM-710L Especificações

CDM-710 Broadcast Satellite Modem Installation and Operation Manual IMPORTANT NOTE: The information contained in this document supersede

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM 11.2 Physical Description ...

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–60 Notes:

Chapter 6. FLASH UPGRADING 6.1 Overview The CDM-710 eliminates the need for updating firmware by physically replacing EPROMs. Instead, the CDM-710 mo

CDM-710 Broadcast Satellite Modem Revision 10 Flash Upgrading MN/CDM710.IOM 6.2 Ethernet FTP upload procedure: 1. Identify the reflashable product

CDM-710 Broadcast Satellite Modem Revision 10 Flash Upgrading MN/CDM710.IOM The downloadable files are stored in two formats: *.exe (self extractin

CDM-710 Broadcast Satellite Modem Revision 10 Flash Upgrading MN/CDM710.IOM 6–4 8. Verify the file transfer. a. The PC should report that the fil

Chapter 7. FORWARD ERROR CORRECTION OPTIONS 7.1 Introduction The CDM-710 Modem operates with error correction base upon the DVB standards: • DVB-

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM LDPC also functions differently than Viterbi decoding b

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM The relation between the two quantities is given by

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM DVB-S2 Standard FECFrame = 64, 800 bits (QPSK 1/4, 1/3 a

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM DVB-S2 Short FECFrame = 16,200 bits* (QPSK 1/4, 1/3

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM A.5.4 Instruction Code Qualifier ...

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 7–6 Figure 7-1. DVB-S QPSK BER versus Eb/No 1.0E-101

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 7–7 Figure 7-2. DVB-DSNG 8-PSK BER versus Eb/No 1

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 7–8 Figure 7-3. DVB-DSNG 16-QAM 1.0E-111.0E-101.0E

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 1.0E-071.0E-061.0E-051.0E-041.0E-031.0E-02-3 -2 -1

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 1.0E-071.0E-061.0E-051.0E-041.0E-031.0E-025 6 7 8 9 1011

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 1.0E-071.0E-061.0E-051.0E-041.0E-031.0E-028 9 10 11

CDM-710 Broadcast Satellite Modem Revision 10 Forward Error Correction Options MN/CDM710.IOM 7–12 1.0E-071.0E-061.0E-051.0E-041.0E-031.0E-0212 13 14

8–1 Chapter 8. SUMMARY OF SPECIFICATIONS 8.1 Summary of Specifications Description RequirementsType: DVB-S2 DVB-S DVB-DSNG EN 302 307 EN 301 4

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Description Requirements1:1 Redundancy Built in controller

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM 8.3 70/140 MHz Modulator Description RequirementsFrequency 5

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM x Figures Figure 1-1. CDM-710 Broadcast Satellite Modem (Shown with

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM 8.4 L-Band Modulator Description RequirementsFrequency 950

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Relative power (dB)-50-40-30-20-100100 0,5 1 1,5 2 2,5 3ABCDEF

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM 8–6 8.5 70/140 MHz Demodulator Description RequirementsFrequ

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Figure 8-2. Demodulator Input Level -70-60-50-40-30-20

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Table 8-2. Eb/No Performance at Quasi Error Free PER = 10-7 w

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Table 8-3. Eb/No Performance for DVB-S QPSK Operations BER Eb

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM 8.9 Remote Port Operation Description RequirementsComtech EF

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM Table 8-6. Data Rate Range: Standard FEC Frame (188 Byte Forma

CDM-710 Broadcast Satellite Modem Revision 10 Summary of Specifications MN/CDM710.IOM 8–12 Table 8-7. Data Rate Range: Short Frame (188 Byte Format

Chapter 9. SNMP INTERFACE 9.1 SNMP Interface The Simple Network Management Protocol (SNMP) is an application-layer protocol designed to facilitate t

Preface Customer Support Contact the Comtech EF Data Customer Support Department for: • Product support or training • Reporting comments or suggest

CDM-710 Broadcast Satellite Modem Revision 10 SNMP Interface MN/CDM710.IOM MIB File/Name Description Fw12051-2-.mib ComtechEFData MIB file Comtec

CDM-710 Broadcast Satellite Modem Revision 10 SNMP Interface MN/CDM710.IOM 9.3 SNMP Community Strings The CDM-710 uses community strings as a pass

CDM-710 Broadcast Satellite Modem Revision 10 SNMP Interface MN/CDM710.IOM 9.5.3 Remote Ethernet Group This group provides the parameters of the m

CDM-710 Broadcast Satellite Modem Revision 10 SNMP Interface MN/CDM710.IOM 9.5.10.1 Firmware Group This group provides a table of firmware numbers

CDM-710 Broadcast Satellite Modem Revision 10 SNMP Interface MN/CDM710.IOM 9–6 Notes:

Chapter 10. CDI-40 ASI Data Interface 10.1 Introduction This data interface is a plug-in module that inserts into the rear of the modem chassis. It

CDM-710 Broadcast Satellite Modem Revision 10 CDI-40 ASI Data Interface MN/CDM710.IOM ASIReceiver ASIReceiver µCClk&DataInterface

CDM-710 Broadcast Satellite Modem Revision 10 CDI-40 ASI Data Interface MN/CDM710.IOM ASIReceiverASIReceiverProcessorMux /DemuxInterf

CDM-710 Broadcast Satellite Modem Revision 10 CDI-40 ASI Data Interface MN/CDM710.IOM 10.2 General Specifications The interface oper

CDM-710 Broadcast Satellite Modem Revision 10 CDI-40 ASI Data Interface MN/CDM710.IOM 10.3 Input/Output Data Formats The ASI interfa

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM About this Manual This manual provides installation and operation information f

CDM-710 Broadcast Satellite Modem Revision 10 CDI-40 ASI Data Interface MN/CDM710.IOM 10–6 10.4 Connector Pinouts 10.4.1 ASI Conne

Chapter 11. CDI-70 1000 Base-T (GbE) INTERFACE 11.1 Introduction The CDI-70 Gigabit Base-T Ethernet Interface or GbE performs a Motion Picture Exper

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM 11.2 Physical Description The GbE is implemented on a 3.95

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM Monitor & Control 1000Base-T Link Statistics Ingress g

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM Monitor & Control (Continued) Management Port Statisti

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM Figure 11-2. GbE Interface Option Board – Phase 1 GELay

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM 11.5 GBEI Software Upload Procedure The GBEI interface boa

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM The current version firmware release is provided. If applic

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM It will take approximately ten minutes to transfer the file

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM 11.6 CDI-70 1000 Base-T Ethernet (GbE) Interface Card Rem

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM Electrical Safety The CDM-710 Broadcast Satellite Modem has been shown to compl

CDM-710 Broadcast Satellite Modem Revision 10 1000 Base-T (GbE) Interface MN/CDM710.IOM 11–10 Notes:

Chapter 12. CDI-60 HSSI Interface 12.1 Introduction This data interface is a plug-in module that inserts into the rear of the modem chassis. It pro

CDM-710 Broadcast Satellite Modem Revision 10 CDI-60 HSSI Interface MN/CDM710.IOM 12–2 Figure 12-2. CDI

CDM-710 Broadcast Satellite Modem Revision 10 CDI-60 HSSI Interface MN/CDM710.IOM 12.3 General Specif

CDM-710 Broadcast Satellite Modem Revision 10 CDI-60 HSSI Interface MN/CDM710.IOM 12–4 Continuous ClockGap

Chapter 13. WEB SERVER PAGES 13.1 Web Server Usage The embedded Web Server application provides the user with an easy to use interface to configure

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13–2 13.1.1 Web Server Menu Matrix Table 13-1. CDM-710 Web Server Me

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13.2.2 Login Prompt By typing http://xxx.xxx.xxx.xxx” (where xxx.xxx.

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13.3 Home Pages 13.3.1 Home Page Figure 13-2. Web Interface – Home

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13.3.2 Contact Information Figure 13-3. Web Interface – Contact page

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM Installation The installation and connection to the line supply must be made in

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13.3.3 Support Figure 13-4. Web Interface – Customer Support page N

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13–7 13.3.3.1 SMTP Configuration Page The SMTP Configuration page is

CDM-710 Broadcast Satellite Modem Revision 10 Web Server Pages MN/CDM710.IOM 13–8 Notes:

A–1 Appendix A. REMOTE CONTROL A.1 Introduction This appendix describes the protocol and message command set for remote monitor and control of the

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–2 A.3 RS-232 This a much simpler configuration in which the controlle

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–3 A.5.1 Start Of Packet Controller to Target: This is the chara

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–4 For example: In a message from controller to target, TFQ? would mean

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–5 A.5.5 Message Arguments Arguments are not required for all me

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–6 A.6 Remote Control Commands and Queries Commands and queries ordered

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–7 App Sect Item C Q Page App Sect Item C Q PageA.6.2 Demod

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM EMC (Electromagnetic Compatibility) In accordance with European Directive 89/33

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–8 App Sect Item C Q PageA.6.4 Priority System (cont) RBS X X A-60

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–9 A.6.1 Modulator Priority System = TMM (Highest priority)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–10 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–11 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–12 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–13 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–14 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–15 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–16 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–17 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM Warranty Policy Comtech EF Data products are warranted against defects in mater

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–18 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–19 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–20 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–21 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–22 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–23 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–24 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–25 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–26 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–27 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM A fixed charge established for each product will be imposed for all equipment

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–28 A.6.2 Demodulator Priority System = RMM (Highest prior

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–29 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–30 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–31 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–32 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–33 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–34 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–35 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–36 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–37 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Preface MN/CDM710.IOM xviii Notes:

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–38 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–39 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–40 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–41 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–42 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–43 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–44 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–45 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–46 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–47 Parameter Type Command (Instruction Code and Qualifier)

Chapter 1. INTRODUCTION 1.1 Overview The CDM-710 Broadcast Satellite Modem (Figure 1-1) is a high symbol/bit-rate unit, intended for operation in bro

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–48 A.6.3 Modem Priority System = TMM (Highest priority), T

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–49 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–50 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–51 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–52 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–53 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–54 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–55 A.6.4 Priority System Priority System = RMM (Highest pr

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–56 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–57 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Introduction MN/CDM710.IOM The modem is compact, being 1RU high x 18.65 inches deep with low power con

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–58 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–59 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–60 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–61 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–62 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–63 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–64 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–65 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–66 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–67 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Introduction MN/CDM710.IOM The modulation and code rate options, available via FAST options, are as fo

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–68 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–69 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–70 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–71 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–72 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–73 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–74 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–75 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–76 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–77 Parameter Type Command (Instruction Code and Qualifier)

CDM-710 Broadcast Satellite Modem Revision 10 Introduction MN/CDM710.IOM 1.2.2 Verification The unit includes a number of tests for rapid verificat

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–78 A.6.5 Modem Global Configuration (MGC) Command The MGC c

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–79 [Tx Block] consists of 50 bytes for Transmit configura

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–80 [Interface Block] consists of 130 bytes and contains the

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–81 Note: The following codes are used in the ‘Response to

CDM-710 Broadcast Satellite Modem Revision 10 Remote Control MN/CDM710.IOM A–82 This page is intentionally blank.

Appendix B. Eb/No MEASUREMENT Although the CDM-710 calculates and displays the value of receive Eb/No on the front panel of the unit, it is sometimes

CDM-710 Broadcast Satellite Modem Revision 10 Eb/No Measurement MN/CDM710.IOM The relationship used to derive the

CDM-710 Broadcast Satellite Modem Revision 10 Eb/No Measurement MN/CDM710.IOM B–3 CDM-710 Co+No/No to C/N (Es/No) and Eb/No (dB) For DVB-S And DVB-

CDM-710 Broadcast Satellite Modem Revision 10 Eb/No Measurement MN/CDM710.IOM CDM-710 Co+No/No to C/N (Es/No) and Eb/No (dB) For DVB-S2 QPSK and 8-

CDM-710 Broadcast Satellite Modem Revision 10 Eb/No Measurement MN/CDM710.IOM B–5 CDM-710 Co+No/No to C/N (Es/No) and Eb/No (dB) For DVB-S2 16-APS

CDM-710 Broadcast Satellite Modem Revision 10 Introduction MN/CDM710.IOM 1.2.4 Additional Data Interface Information Interface Number 1:1 Capabil

CDM-710 Broadcast Satellite Modem Revision 10 Eb/No Measurement MN/CDM710.IOM B–6 This page is intentionally blank.

METRIC CONVERSIONS Units of Length Unit Centimeter Inch Foot Yard Mile Meter Kilometer Millimeter 1 centimeter — 0.3937 0.03281 0.010

2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 • 333 • 2200 PHONE 480 • 333 • 2161 FAX

CDM-710 Broadcast Satellite Modem Revision 10 Introduction MN/CDM710.IOM 1–6 1.3 Major Assemblies “Later units” pertains to Rev A and later chass

Chapter 2. INSTALLATION 2.1 Unpacking and Inspection Inspect shipping containers for damage. If shipping containers are damaged, keep them until the

CDM-710 Broadcast Satellite Modem Revision 10 Installation MN/CDM710.IOM 2.2.1 Optional Rear-Mounting Support Brackets Install optional rear-mount

CDM-710 Broadcast Satellite Modem Revision 10 Installation MN/CDM710.IOM Equipment Rack Rear Mounting Rail #10 Shoulder Screw #10 Bracket Bolt Supp

CDM-710 Broadcast Satellite Modem Installation and Operation Manual Part Number MN/CDM710.IOM Revision 10 March 4, 2008 Copyri

CDM-710 Broadcast Satellite Modem Revision 10 Installation MN/CDM710.IOM 2–4 Notes:

Chapter 3. FUNCTIONAL AND PHYSICAL DESCRIPTIONS 3.1 Overview The modem is constructed as a 1RU high rack-mounting chassis, which can be freestanding,

CDM-710 Broadcast Satellite Modem Revision 10 Functional and Physical Description MN/CDM710.IOM An Rx carrier from the satellite is received by the

CDM-710 Broadcast Satellite Modem Revision 10 Functional and Physical Description MN/CDM710.IOM 3.3 Dimensional Envelope All dimensions are in Eng

CDM-710 Broadcast Satellite Modem Revision 10 Functional and Physical Description MN/CDM710.IOM 3–4 Notes:

Chapter 4. CONNECTOR PINOUTS 4.1 External Connections External cables are attached to connectors on the rear panel. The connector configurations di

CDM-710 Broadcast Satellite Modem Revision 10 Connector Pinouts MN/CDM710.IOM Table 4-1. Modem Rear Panel Connectors For Initially Released Chassis

CDM-710 Broadcast Satellite Modem Revision 10 Connector Pinouts MN/CDM710.IOM 4.1.2 10/100 Ethernet Remote Port Connector Pinout, J4 The Remote con

CDM-710 Broadcast Satellite Modem Revision 10 Connector Pinouts MN/CDM710.IOM 4.1.5 External Reference Input (Main Chassis), J7 The Ext Ref (Extern

CDM-710 Broadcast Satellite Modem Revision 10 Connector Pinouts MN/CDM710.IOM Redundancy is available only with the Rev. A chassis or later. 1:N (

This page is intentionally blank.

CDM-710 Broadcast Satellite Modem Revision 10 Connector Pinouts MN/CDM710.IOM 4–6 Notes:

Chapter 5. FRONT PANEL OPERATION 5.1 Introduction LED Vacuum Fluorescent Indicators

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.1.1 Front Panel LED Indicators The behavior of the ei

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.1.2 Front Panel Keypad The keypad is shown in Figure 5

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–4 5.1.3 Front Panel Vacuum Fluorescent Display (VFD) Th

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.1.4 Menu Matrix Para Description Remarks5.2 Opening S

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.2 Opening Screen The opening ‘welcome screen’ shown her

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.1 (SELECT:) CONFIG CONFIG: Remote Tx Rx Int1 Int2

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.1.1 (CONFIG:) Remote Control Remote Control: Local

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Interface Æ RS232 is selected: In RS232 Mode the Bus

Table of Contents TABLE OF CONTENTS ... II

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Ethernet CONFIG: Æ Address is selected: Ether IP Addre

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If SNMP Trap IP Address: Æ IP1 or IP2 is selected: Trap I

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Tx Æ Mod IMPORTANT The Pilot and Frame selection

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Tx Modulation Æ Pilot is selected (this menu is active

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Tx Æ Code CodeRate:1/2 3/5 2/3 3/4 4/5 5/6 7/8

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Symbol Rate / Data Rate Range – Standard FECFrame and 188

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Symbol Rate / Data Rate Range – Short FECFrame and 188 Byt

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If S2-G/S2-TS is selected, the (CONFIG:) Tx Æ Mode Æ S2-G/

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Tx Power Æ Level is selected: TX Output Power Level: -

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.1.3 (CONFIG:) Rx Rx: FEC Dem Code SymRate Mode Freq E

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM 1.2.4 Additional Data Interface Information ...

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Select the demodulation type using the ◄ ► arrow keys. The

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Rx Demod: Æ Eq is selected: Rx Adaptive Equalizer: O

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Rx Æ Code Code Rate: 1/2 3/5 2/3 3/4 4/5 5/6 7/

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Rx Æ Mode Receive Mode (DVB): S2-G/S2-TS S DSN

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–24 Edit the Eb/No alarm point by selecting the digit to

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–25 If Intfc1 ASI Tx: Æ Ena/Dis is selected: Intfc1 ASI

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Intfc1 ASI: Æ Config Intfc1 ASI CONFIG: Port

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Intfc1 HSSI: Æ Tx Intfc1 Tx Data Clock Enable

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Intfc1 Tx Æ Enable is selected: Intfc1 Tx Enable: Ena

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Intfc1 Rx Æ Buffer is selected: Intfc1 Rx Buffer: S

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM 5.3.1.2 (CONFIG:) Tx ...

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Rx-Sat (default) Effectively disables the Rx Buffer becaus

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.1.6 (CONFIG:) Intfc2 (CDI-70 Gigabit Ethernet Interfa

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Note: SMPTE absorbed the per-MPEG Forum and released SMTE

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Intfc2 Multicast Stream: Æ 2 is selected: Intfc2 Addr

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Select Dual for redundancy operation with dual IP connect

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Intfc2 Gigabit Egress: Æ Ena/Dis is selected: Intfc

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Intfc2 Gigabit Egress: Æ IP is selected: Intfc2 Egr

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (CONFIG:) Intfc2 Gigabit Ethernet: Æ Man Intfc2 Management

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–38 GBEI Statistics Summary LAN Rx Err (In) – Total frame

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5–39 GBEI Statistics Summary WAN Good Octets (IN) - The su

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM 5.3.6.1 (SELECT:) UTIL: Æ RT-Clk ...

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.1.7 (CONFIG:) Ref Frequency Reference External 10

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM The Force (1:1) selection is only available for use with a

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Alarm Mask: ÆIntfc2 is selected (valid only for the ASI

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM If Live Alarms: Æ Receive is selected: RX Traffic: Demod

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.2.2 (SELECT:) Monitor: Æ Rx_Stats For DVB-S2 only: Es

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.2.3 (SELECT:) Monitor: Æ Event-Log Stored Events: Vie

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM PLL Clock Symbol Rate Mod symbol rate defitter PLL unlock

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM ASI2 Rx PLL Upper Limit Reached ASI Rx PLL Upper Limit Re

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (SELECT:) Test: Æ Mode Test: Normal RF IF I/O Tx-CW

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM NormalDataDriverFECEncodeModulatorDataDriverFECDecodeDeMod

CDM-710 Broadcast Satellite Modem Revision 10 Table of Contents MN/CDM710.IOM CHAPTER 9. SNMP INTERFACE ...

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.4 (SELECT:) INFO Note: INFO screens display informati

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (SELECT:) INFO: Æ Rx RX: 0140.0000 17.379483 DVBS2 QP 1/2

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.5 (SELECT:) Save/Load Save/Load Configuration: Save

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Loc 0 Contains Data ! Overwrite? NO YES (E) The user

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.6 (SELECT:) Util (Utility) UTIL: RT-Clk Ref ID Di

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM 5.3.6.3 (SELECT:) UTIL: Æ ID Edit Circuit ID: ( E) -

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (UTIL:) Firmware Æ Info Firmware Info: Bootrom Image#1 Im

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM Mod: Filters Mod Filters: 11/23/05 FW12695- 1.1.1 Mod: FP

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM (UTIL:) Firmware Æ Select Current Active Image: #2 Next Re

CDM-710 Broadcast Satellite Modem Revision 10 Front Panel Operation MN/CDM710.IOM The Demo Mode enables all FAST options for a limited time.