Comtech EF Data Vipersat CDD-564L Especificações descarregar pdf (Página 99)

CDD-562L/564 Demodulator with IP Module Revision 2

Quick Start Guide MN/CDD564L.IOM

7–7

7.3.2 Set CDM-IP Modems to Router Mode Operation

Perform the following steps on Satellite Modems (CDM-IP) 1 and (CDM-IP) 2:

Step Description

1 Beginning with the CDM-IP 1 modem:

From the CLI Main Menu, select the Administration [A] submenu.

2 From the Administration submenu, select CDM-IP Working Mode [C].

3 Select [1] for Router Mode – Small Network Mode.

When the following prompt is displayed:

Changing Modem working mode requires system Reboot.

Do you want to continue(Y/N)[Enter :No]

Confirm, when prompted, by typing [y] (yes).

4 Allow CDM-IP to reboot then, from the CLI Main Menu select Interface Configuration [ I ].

5 From the Interface Configuration submenu, select Receive HDLC Channel Addresses [H].

6 From the Receive HDLC Channel Addresses submenu, select [1] for HDLC Addr 1.

When the following prompt is displayed:

Please enter a value for the HDLC Addr 1

Press ESC to abort

HDLC address [SMALL NETWORK] in hex <0x1 - 0xFE, enter = 0001>:

Enter [1] to set HDLC Addr 1 to 0x01.

HDLC Addr 1 will display as 0x0001, although only the last two digits are used in

Small Network Mode, allowing up to 254 separate HDLC addresses.

7 Continuing to the CDM-IP 2 modem:

For CDM-IP 2, repeat Steps 1-6 – except – for Step 6, set HDLC Addr 1 to 0x02.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 253 254

Sem comentários

Comtech EF Data Vipersat CDD-564L Especificações Página 99