Comtech EF Data KP-10 Especificações descarregar pdf (Página 17)

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

Table 5 KP-10 RS-422 Pinout

Pin Number Function I/0

1 -RX INPUT

2 +RX INPUT

3 +TX OUTPUT

6 -TX OUTPUT

5 GND POWER RETURN

9 +V POWER

Cable diagrams for the various interface cables can be found in Appendix C.

2.2 CONNECTING AND SUPPLYING POWER

Note: The KP-10 is not weather resistant. Please treat the terminal with the same care afforded

a laptop computer.

Connecting the KP-10 is a matter of plugging the interface cable into both the KP-10 and

the unit being controlled.

Power for the KP-10 is supplied from the RF terminal or redundant unit

The connection is a 9-pin female D connector located on the top of the KP-10.

To connect the KP-10 and supply power:

Plug the 9-pin connector into the receptacle on the top of the KP-10 (Figure 2).

Plug the 26-pin connector into the remote receptacle on the RFT (Figure 3), or into the J16

Monitor and Control receptacle on the RSU (Figure 4).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sem comentários

Comtech EF Data KP-10 Especificações Página 17