Comtech-ef-data MIDAS Version 4.X NMS Configuration Manual do Utilizador Página 18
- Página / 150
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MIDAS 4.X NMS Configuration , Rev. 6
1–6 Introduction to MIDAS NMS
Controller Server
Redundancy
In an optional 1:1 redundant configuration, the backup Controller Server
monitors the active Controller Server and the RF chain.
If a failure is detected in the active Controller Server or the RF chain, the
backup NMS assumes the active role. If required, the Controller Server
operator can command a switchover manually.
Active and backup Controller Server(s) synchronize the databases on the LAN
over a dedicated circuit.
Optional 1:1 redundancy for the Network Control Modem or the LinkSync™
Modem is provided via Comtech EFData's SMS-301 Redundancy Switch.
Within 20 milliseconds of a detection of a fault in the online modem, the
SMS-301 switches to the backup modem.
The SMS-301 switch must be configured as remote address 1 running at EIA-
232, 19.2 kbps. Modem A and Modem B must have remote addresses 2 and 3,
respectively. Those modems must be configured at 9600 bit/s. (EIA-485, 2-
wire, Even). For detailed information on the SMS-301 switch, refer to the
SMS-301 Redundancy Switch Installation and Operation Manual.
- Revision 6 1
- MIDAS Version: 4.X 3
- Network Customer Support 4
- Preface, iii 5
- Preface, iv 6
- Preface, v 7
- Preface, vi 8
- Table of Contents 9
- Preface, viii 10
- IMPORTANT 11
- Concerning this Manual 12
- Disclaimer 12
- NMS Components 15
- Standard Controller 17
- Server Features 17
- Options 17
- Controller Server 18
- Redundancy 18
- Node Components 19
- 2. Click on a menu option 23
- 3. Press the Enter key 23
- ♦ System Administration 29
- Setup and Operation 2–3 31
- 2–4 Setup and Operation 32
- Satellite/System 33
- Parameters 33
- 2–6 Setup and Operation 34
- Transponder 35
- 2–8 Setup and Operation 36
- Setup and Operation 2–9 37
- Bandwidth Pool 38
- Major Bandwidth 39
- Pool Functions 39
- Adding Bandwidth 39
- Private Pools 40
- Deleting Bandwidth 41
- 2–14 Setup and Operation 42
- Toolbar 43
- height 44
- Grid Properties 46
- View Properties 47
- Legend Properties 48
- 2–22 Setup and Operation 50
- Placement Selection 52
- Outbound 53
- Inbound Parameters 53
- Options Parameters 54
- Aloha Parameters 55
- 2–30 Setup and Operation 58
- Node Alignment 60
- 2–34 Setup and Operation 62
- Setting Power 63
- Levels for Traffic 63
- Channels 63
- 2–36 Setup and Operation 64
- 2–38 Setup and Operation 66
- 2–40 Setup and Operation 68
- 2–42 Setup and Operation 70
- 2–44 Setup and Operation 72
- 2–46 Setup and Operation 74
- 2–48 Setup and Operation 76
- User Information 78
- Group Administration 79
- 2–52 Setup and Operation 80
- Add Group 81
- Edit User Privilege 82
- 2–56 Setup and Operation 84
- 2–58 Setup and Operation 86
- 2–60 Setup and Operation 88
- 2–62 Setup and Operation 90
- 2–64 Setup and Operation 92
- Point-to-Multipoint 94
- Data Details 94
- Delete Hunt Groups 95
- 2–68 Setup and Operation 96
- Available Channels 98
- Assigned 99
- 2–72 Setup and Operation 100
- Hunt Groups 102
- Ascending or Descending 102
- Reports Menu 3–1 103
- 3–2 Reports Menu 104
- Reports Menu 3–3 105
- 3–4 Reports Menu 106
- Reports Menu 3–5 107
- 3–6 Reports Menu 108
- Reports Menu 3–7 109
- 3–8 Reports Menu 110
- Reports Menu 3–9 111
- 3–10 Reports Menu 112
- Reports Menu 3–11 113
- 3–12 Reports Menu 114
- Reports Menu 3–13 115
- 3–14 Reports Menu 116
- 4–2 Maintenance Menu 118
- Maintenance Menu 4–3 119
- Specify the 120
- Export Path 120
- Maintenance Menu 4–5 121
- 4–6 Maintenance Menu 122
- Maintenance Menu 4–7 123
- 4–8 Maintenance Menu 124
- Maintenance Menu 4–9 125
- 4–10 Maintenance Menu 126
- Maintenance Menu 4–11 127
- 4–12 Maintenance Menu 128
- Maintenance Menu 4–13 129
- 4–14 Maintenance Menu 130
- Maintenance Menu 4–15 131
- 4–16 Maintenance Menu 132
- Ku-Band Frequency 133
- Translations 133
- Conversion Formulas 134
- An Example Ku-Band 135
- Carrier 135
- System Setup 135
- Space Segment 136
- Control Channel 137
- A-6 Frequency Translations 138
- Frequency Translation A-7 139
- IF to Ku-Band 140
- Frequency Inversion 140
- 70 MHz IF 141
- A-10 Frequency Translations 142
- Frequency Translation A-11 143
- A-12 Frequency Translations 144
- Frequency Translation A-15 147
- A-16 Frequency Translations 148
- Frequency Translation A-17 149
- 480 • 333 • 2200 PHONE 150
- 480 • 333 • 2161 150
Manuais e produtos relacionados com Equipamento Comtech-ef-data MIDAS Version 4.X NMS Configuration
Equipamento Comtech-ef-data MIDAS Version 4.X Basic Configuration Manual do Utilizador
(164 páginas)
(164 páginas)
Equipamento Comtech-ef-data Ku-Band Power Amplifier with Optional L-Band Manual do Utilizador
(34 páginas)
(34 páginas)
Equipamento Comtech-ef-data SPOD PS 1, PS 1.5, and PS 2 C-, X-, or Ku-Band Manual do Utilizador
(194 páginas)
(194 páginas)
Equipamento Comtech-ef-data D&I Manual do Utilizador
(24 páginas)
(24 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais